SMART series of blowing machine fills the gaps in field of domestic high-speed linear blowing machine currently.pet bottle blow molding machine has our own intellectual property rights, and has obtained more than 13 national patents. This machine is equipped with automatic perform loading and...
9000bph Automatic PET Bottle Blowing Machine
Full automatic pet blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used for producing the carbonated bottle, mineral water bottle, pesticide bottle, oil bottle and cosmetics bottle etc.
Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes . it is widely used to produce the carbonated bottle,mineral water bottle, pesticide bottle,oil bottle,cosmetics bottle ect. Its baking tunnel is separated from the blow station so that time for mold opening is shortened with a result of speedy blowing and high output, damage to machine is lessened so as to keep reliable performance and prolong service life, as well as machine runs more smoothly and steadily.
High speed with reasonable structure:
The unique linkage cam can finish mold-opening, mold-locking and bottom mold-elevating in one movement, the blowing period is greatly reduced to 2 seconds.
The linkage cam is intelligently driven by one servo motor, this obviously simplify the blowing machine structure, which make it convenient to maintain and no need for heavy lubrication work.
Less heating oven, small electricity consumption
The preforms distance in the heating oven is only 38.1mm, which means more preforms can be put into the oven compared with the traditional blowing machine. The heating efficiency is largely improved, and as a result, it saves more than 30% electricity consumption than the traditional blowing machine.
The machine adopts modularized design concept, it has compact and reasonable structure, it reduces the failure rate from the basic design angle. FG4 does not need the low air compressor.
Automatic perform input and ready bottle output system.
Machine adopt with the overall structure of super-standard anti-vibration design, high-speed operation state of the machine will shake down to a minimum.
Machine adopts modular assembly method, greatly decrease the local amendments due to technological improvements when the machine is on processing.
The structure of machine oven adopt the international most advanced energy-saving technology of infrared radiation heating, temperature control with automatic negative feedback, closed-loop regulation model.
Automation controlling item adopts international high-end computer system, heating, collecting and measuring perform temperature with simulation input and output module.
Man-machine interface displays current production situation, available for on line switching, parameter modification and production accounting, with automatic alarm, automatic fault detection and diagnose.
Storing more than 7 kinds specification for making bottle.
Adopt latest international air pneumatic.
In order to save air, we choose high pressure blowing exhaust recovery system, which can save energy by 10-15%.
1)Simple structure in linear type ,easy in installation and maintaining.
2) Adopting advanced world famous brand components in pneumatic parts, electric parts and operation parts.
3) High pressure double crank to control the die opening and closing.
4) Running in a high automation and intellectualization, no pollution
5) Apply a linker to connect with the air conveyor, which can directly inline with filling machine . .
6) Stretch blow molding, save much more air consumption with high capacity and long service life.
7) High quality Muffler, and safety protecting gate, guarantee operators safe.
pet bottle blow molding machine parameters
Detail specification of FG-6 PET bottle blowing machine
|Capacity||Depend on bottle design||9000-12000PCS/H|
|Electric consumption||Install power||51kw|
|Heating oven powder||46kw|
|Heating Oven operating power||28kw|
|Air consumption||Pressure||8m3/min 4.0MPa|
|Capacity:9000-12000PCS/H(based on 0.5L)|
|Max. Volume: 2 Litter|
Blowing Main machine: 3.6*1.3*2.3m
|Pneumatic part& Cylinder||Valve||GERMAN FESTO|
|Electric part||PLC||JAPAN Mitsubishi|
|Servo System||JAPAN Panasonic|
|Frequency inverter||JAPAN Mitsubishi|
|Operating system||JAPAN Mitsubishi|
|Touch screen||JAPAN Mitsubishi|
|One-way Valve||GERMAN FESTO|
|Throttle Valve||GERMAN FESTO|
|Reducing Valve||GERMAN DURAY|
|Note: All the electrical components adopts CE,UL,CCC approved international|
advanced high-tech product
1> The machine will be tested and checked at our workshop before delivery.
2>After one year, we will supply accessories are provided only one the cost price.
3> Free Spare Parts : Digital instrument, Sealing, Stretching cylinder seal ring, Mould-adjustment wrench, Furnace temperature table, Furnace heating tube and other relative vulnerable part.
4>Free production technology and process configuration.
5> We can help you to design the product line, workshop and provide turn-key project.
6>Installation: Experts' team to buyer's country after confirmation that the goods arrived in site and civil works completed get ready for installation. Funds for trip need to be payed by client and extra salary $100/day during the engineer's journey.
7>Warranty: One year from the date of Installation or acceptance of the Plant whichever comes first