small extrusion blow moulding machine

First, the electronic control system: Japan's Mitsubishi PLC computer and human-machine interface (English or Chinese) control, color touch-screen operation. All the process set to change, retrieval, monitoring, troubleshooting and other functions are implemented on the touch screen, no...

Product Details

Product Name

Small Extrusion Blow Moulding Machine

Machine Part Introduction

First, the electronic control system: Japan's Mitsubishi PLC computer and human-machine interface (English or Chinese) control, color touch-screen operation. All the process set to change, retrieval, monitoring, troubleshooting and other functions are implemented on the touch screen, no point of contact with the working principle, components and durable.
Second, the hydraulic system: proportional pressure control, with imported brands Yuken hydraulic components, stable and reliable.
Third, the plasticizing system: efficient plastics mixing screw, to ensure plasticizing full uniform.
Fourth, the speed control system: VVVF + alloy steel and hard gear reducer, speed stable, low noise, durable.
Fifth, the opening and closing mold, mold transfer system: beam arm, three position, center locking clamping mechanism, to ensure long-term use. Clamping force balance, no deformation, the use of body translation mode (ball linear guide), high precision, low resistance, fast.
Sixth, blowing the needle holder: blow the whole Square-type needle holder, a solid does not shift to ensure a smooth incision products.

Product Feature

Infrared lamps adoped in the pre-heater ensures PET preforms being heated evenly.

Mechanical-double-arm calmping ensures mould being tightly closed under hight pressure and high temperature.

Pneumatic system consists of two parts. pneumatic acting part and bottle blowing part in order to meet different requirements for both acting and blowing. It provides sufficient steady high pressure to blowing. It provides sufficient steady high pressure to bloww large irregular shape bottles.

Equipped with silencer and oiling system to lubricate the mechanical pars of the machine.

Operated step-by-step and in semi-auto maode.

Wide-mouth jar and hot-fill bottles can also be made.


Model
HTII-5L
Station
Double station
Max. Product Volume(L)5L
Dry cycle(pc/h)700 * 2
Screw Diameter(mm)70
Screw L/D ratio(L/D)25
Screw drive power(KW)22
Screw heating capacity(KW)6.2~8.2
No. of heating zone(ZONE)3
Max.Output of HDPE(Kg/hr)70
Oil pump drive power(KW)7.5
Clamping force(KN)60
Mold stroke(mm)148~508
Max. Size of Mold(W*H)(mm)370*390
Max.Die diameter(mm)145
Die heat capacity(KW)2.5
No. of heating zone(ZONE)3
Central distance of Double head(mm)160/180
Blowing pressure(Mpa)0.6
Air volume(M3/MIN)0.4
Cooling water pressure(Mpa)0.2~0.3
Water consumption(L/MIN)60
Size of machine ( L*W*H)(m)3.43*2.3*2.65
Weight of machine(TON)5.5
Inquiry