Product Details :Fully automatic Extrusion blow moulding machine HT-18L TECHNICAL SPECIFICATION Hydraulic Parts b) Electrical Parts c) Pneumatic Parts d) Parison wall thickness controller Product Pictures Our history : We have a mature service experience of 19 years (more than 4,000 customers)....
Product Details :Fully automatic Extrusion blow moulding machine HT-18L
TECHNICAL SPECIFICATION
Моdel | HT-18L | |
station | Single | |
Max product volume | (L) | 18 |
Cycle time | (pc/h) | 700 |
Screw Diameter | (mm) | 80 |
Screw L / D | (L/D) | 25 |
Screw drive power | (KW) | 30 |
Screw heating power | (KW) | 8.2 |
Number of heating zone | (ZONE) | 4 |
Maximum. HDPE output | (Kg/hr) | 110 |
Oil pump drive power | (KW) | 11 |
Clamping force | (KN) | 158 |
Distance to table | (mm) | 240~680 |
Working stroke of the mold | (mm) | 700 |
Maximum. Mold Size (W * H) (W * H) | (mm) | 610*540 |
Maximum. Diameter | (mm) | 220 |
Stamp heat capacity | (KW) | 2.6 |
Number of heating zone | (ZONE) | 3 |
Blowing pressure | (Mpa) | 0.6 |
Air volume | (M3/MIN) | 0.8 |
Cooling water pressure | (Mpa) | 0.3 |
Water consumption | (L/MIN) | 60 |
Machine size (L * W * H) | (m) | 4.1*2.9*3.1 |
Machine weight | (TON) | 8~9 |
Hydraulic Parts
Name | Supplier | Origin |
Oil Pump | YUKEN, PARKER | Japan |
Valve | HYTEC | Japan |
b) Electrical Parts
Name | Supplier | Origin |
Microcomputer Control System | MITSUBISHI PLC | Japan |
Touch Screen | Inovance | China |
Temperature Controller | MITSUBISHI | Japan |
Conductor | SCHNEIDER | France |
Air Switch | SCHNEIDER | France |
Motor | SIMENS BEIDE Asynchronous Motor | Japan |
Power Resource | MEAN WELL | Taiwan |
Inverter | MITSUBISHI | Japan |
c) Pneumatic Parts
Name | Supplier | Origin |
Solenoid Valve | FESTO | Germany |
Cylinder | FESTO | Germany |
d) Parison wall thickness controller
Name | Supplier | Origin |
Parison controller | MOOG | Japan |
Product Pictures
Our history :
We have a mature service experience of 19 years (more than 4,000 customers). From product design, mold design, process design, auxiliary equipment to complete equipment selection, we can provide you with comprehensive pre-sales and after-sales service; we also provide you with long-term expert-level professional blow molding technology training! During your production process, our professional service phone that is turned on 24 hours a day can guide you through the general process and equipment issues. If necessary, no matter where you are, we will send a service engineer to provide you with on-site service, and at the same time, sufficient spare parts and prompt delivery to ensure your production is worry-free!