plastic water tank making machine

This plastic water tank making machine can process LDPE, HDPE, PP, PC, PA, PS, ABS, EVA, PETG, EVOH, PVDC, PAN, PPE, POM, TPE. It can usually be used to produce plastic bottles, plastic containers, barrels, cans, tool kits, shaped hollow parts, hollow chairs, automotive fuel tanks, plastic plates, etc. Its packaging capacity ranges from 20 to 5,000 liters.

Product Details

Product description:

1. This plastic water tank making machine can process LDPE, HDPE, PP, PC, PA, PS, ABS, EVA, PETG, EVOH, PVDC, PAN, PPE, POM, TPE. It can usually be used to produce plastic bottles, plastic containers, barrels, cans, tool kits, shaped hollow parts, hollow chairs, automotive fuel tanks, plastic plates, etc. Its packaging capacity ranges from 20 to 5,000 liters. Its electrical system is Japan's Mitsubishi PLC and human-machine interface. Its hydraulics are from Janpan's YUKEN hydraulic valves and pumps or HYTEK from Taiwan.

2. Plastic water tank making machine's plasticizing system is an effective, energy-saving screw. Its extrusion system is a frequency converter and a hardened surface gearbox. Its clamping device uses straight-line slides with a level of accuracy. The extrusion cap of plastic water tank making machine can be adjusted up and down, the die can be moved hydraulically, and it is very easy to change the mold. You can choose single-head die, double-head die, three-head die, four-head die, and six-head die. You can also choose single, double, quad, five and six.

Product specifications:

Model No. TDB-250A
Max.Product Volume(L) 250 Max.Die of Diameter(mm) 620
Dry cycle(pc/h) 300 Die heat capacity(KW) 15
Screw Diameter(mm) 120 No. of heating zone 6
Screw L/D ratio (L/D) 32 Central distance of bi-head(mm)
Screw drive power(KW) 132 Max. Die Diameter(bi-head)(mm)
Screw heating capacity(3ΦKW) 16.2~23.6 No. of heating zone
No. of heating zone 5 Heating capacity(KW)
Output of HDPE(kg/h) 320~380 Blowing pressure(Mpa) 1
Oil pump drive power(KW) 22 Air volume(M3/min) 2
Clamping force (KN) 770 Cooling water pressure(Mpa) 0.3
Mold Stroke(mm) 800~1800 Water consumption(L/min) 300
Max.Size of Mold(W*H) (mm) 1200*1720 Size of machine(L*W*H) (m) 7.8*2.9*5.4
Capacity(L) 22 Weight of machine(TON) 38
Inquiry